Fuel Polishing Systems

52,000L Roller door bunded fuel storage tank detail end view of pump cabinet

Koronka manufacture a wide range of Fuel Polishing systems depending on the size of your fuel tank. The system is designed to take the fuel out of the bottom of the tank through a pump that recirculates it into the back of the vessel. The discharge is then piped half way down the vessel to a T piece which discharges the oil sideways so it does not “Jet” down to the base of the tank.

We have several models of filter vessels which clean the oil as the links below show. The standard unit we use is a Racor FBO-14 which can be fitted with filters from 1, 5 ,10 & 25 micron elements. This unit is more than capable for use in tanks up to 25,000 ltrs. Larger tanks can be supplied with RVFS units which come in 3 models as shown on the supporting documentation.

FUEL POLISHING SYSTEM SPECIFICATION

Hydrocarbon Filter Vessel
50mm or 40mm Inlet and Outlet ports
2 x Water Sight Glasses
Interior half epoxy coated
Max capacity is 283 L/per Min capacity 50L/per Min
Lowara CEA210/3 or CEAM70/3 pump
Lock shield valve fitted on discharge side of pump to regulate flow through filter
Control panel for control of all pump with built in 7 day timer

SPEC SHEET ON FILTER ASSEMBLY PDF Spec Sheet of Filter {88KB}

O and M MANUAL ON FILTER ASSEMBLY PDF Spec Sheet of Filter {2.82 MB}

FUEL FILTER / WATER SEPARATOR PDF Information Sheet on Fuel Filter {150KB}

RACOR WATER LEVEL PROBE PDF Instruction Sheet for RK 30880 {33KB}